中文
15067647777Vessel Trading Inquiry
Home / Vessel Trading Guides / Tanker Trading Key Points

Used Tanker & Product/Chemical Tanker Trading: Double Hull and Tank Coating

Core points in used tanker and product/chemical tanker trading: double hull requirements, coating types and cargo compatibility, pump room and piping checks, inert gas system and pollution certificates.

Tanker price differences show up in the structure more than with bulk carriers. Double bottom, double sides, tank coating and inert gas system determine what it can carry, whether it passes survey and what it's worth.

1. Double Hull: Confirm If It's a Hard Requirement

MARPOL Annex I sets clear double-hull requirements for tankers; single-hull tankers are being phased out internationally, with domestic phase-out schedules by tonnage and build year.

Before buying, confirm whether the vessel is double-hull, double-bottom/single-side or single-hull, and which band its year and GT fall into. A vessel whose structure fails current rules may not obtain the certificates needed to operate.

'Double hull' isn't a single standard—check whether double bottom height and side shell width meet rule minima. Some older vessels had partial retrofits that fall short; this shows up in survey reports.

2. Tank Coating: Determines Cargo Compatibility

Coating is the most valuable yet most fragile part of a tanker. Common types: stainless steel (full or partial), epoxy, zinc silicate (inorganic zinc) and bare steel with no coating.

Stainless tanks carry chemicals, acids and other corrosive cargo and are the most valuable; epoxy suits refined products and some chemicals; bare steel is mostly for crude or specific oils. Once coating fails over a large area, repairs are very costly, usually requiring full blasting and recoating.

During inspection, review the coating survey report or on-site records: location and area of blistering, peeling, rust spots and mechanical damage. This is a core basis for negotiation.

3. Product/Chemical Tankers: IBC Code Compliance

Chemical tankers must comply with the IBC Code, with ship types 1, 2 and 3 corresponding to different hazard levels. The type dictates what cargo it can carry and can't be exceeded at will.

Check: IBC certificate, Certificate of Fitness cargo list, tank material and coating, independent pump room and piping material, and tank washing system.

Oil/chemical tankers are more popular for their cargo-switching flexibility, but confirm certificates are valid in both modes.

4. Pump Room, Piping and Safety Systems

The pump room is a high-incident area on tankers. Check: cargo pump model and capacity, shaft seals, bilge condition, fixed fire-extinguishing system (CO2 or foam) validity and pump room ventilation.

For piping check material and valves: stainless or coated piping suits corrosive cargo, plain carbon steel only normal oils. Valve leakage is a common hidden issue—do a pressure test during survey.

Inert Gas System (IGS): mandatory for tankers above the specified DWT threshold to control tank oxygen levels. Check the system works and the oxygen analyser is within calibration. Vapour emission control (VOC) systems are increasingly required under new rules.

FAQ

Can single-hull tankers still be bought?
Depends on use and applicable rules. For international trade it's essentially unviable; for domestic use check the current phase-out schedule against tonnage and build year. Before purchase, ask the survey authority whether the vessel can obtain operating certificates—don't rely on experience.
Can damaged tanker coating be repaired?
Yes, but costly. Local repair is feasible; extensive damage usually needs full-tank blasting and recoating, costing a substantial share of vessel price and taking weeks. Coating condition is therefore a key valuation variable.
What's the price gap between oil and product/chemical tankers?
Product/chemical tankers usually cost more than oil tankers of the same tonnage, due to IBC compliance, mostly stainless or premium-coated tanks and more complex piping and pump rooms. The gap varies with age, coating and ship type—no fixed ratio.
What's the most overlooked risk when buying a tanker?
Hidden defects in the pump room and piping, and the authenticity of coating reports. Neither is easy to see on site—third-party testing and document verification are essential. Also confirm pollution certificates and oil pollution liability insurance are in place.
Compiled by Taizhou Changlong Ship Trading Co., Ltd. based on real transaction experience. Specific vessel condition is subject to physical survey and current regulations.