Bulk carriers are the most traded type in the used market—and the type where same-tonnage vessels can differ twofold in price. Behind the gap lies a mix of age, structure, class society and remaining survey time. This article breaks those variables down.
1. Match Tonnage Band to Use Case
1000 to 5000 DWT: suited to inland and short coastal runs, sand, gravel and construction materials; few port restrictions and the largest domestic fleet.
1,4 to #,# DWT (Handysize): mainstay of coastal and short-sea trade, flexible cargo—grain, coal, minerals and steel.
4,6 to #,# DWT (Handymax / Supramax): mostly geared, ideal for ports without discharge equipment, serving both short-sea and ocean routes.
6,8 to #,# DWT (Panamax): mainstream ocean-going type constrained by Panama Canal dimensions, mainly coal and grain.
Above 10,# DWT (Capesize): ocean transport of iron ore and coal, needing large berths and facilities; buyers are mostly shipping companies or major traders.
Ninety percent of domestic buyers fall in the first two bands. Don't over-size: if berth depth, channel limits or cargo stability don't match, a larger vessel becomes a burden.
2. Age & Special Survey: The Real Price Divide
Bulk carrier certificates typically run on a 5-year cycle; special and dock survey milestones are the price divide. Freshly surveyed vessels command a clear premium, while those nearing survey let buyers budget for repairs and negotiate harder.
Above 15 years, focus on the latest thickness survey: remaining corrosion margin in ballast tanks, double bottom and side shell, and whether plates have been renewed to standard. Beyond 20 years, financing and insurance become restricted and resale gets harder.
Don't judge condition by age alone. A well-maintained 18-year-old vessel can be more reliable than a neglected 12-year-old one; survey reports and actual thickness data are what count.
3. Structural Differences: Single vs Double Side
Traditional bulk carriers are mostly single-side with double bottom—large hold capacity and low cost; double-side structures resist collision and corrosion better but have slightly less capacity.
Cargo hold tank tops and lower hoppers are corrosion hotspots; inspect tank top thickness, corrosion of frames and brackets, and ballast tank coating condition.
Hatch cover watertightness is the most frequent defect on bulk carriers. Aged seals, distorted covers and failed cleats cause cargo damage and are a PSC focus; a hose test is recommended during survey.
4. Engines, Cranes & Equipment
Main engine brand directly affects spare parts availability and maintenance costs. Domestic coastal vessels often use Chinese engines such as Guangchai and Ningdong, with cheap parts and easy maintenance. Ocean-going vessels mostly use MAN B&W;and Wärtsilä, with higher parts costs but comprehensive global service networks.
Geared vessels (usually 4 cranes of 25 to 40 t) suit ports without discharge gear, but cranes need lifting appliance certificates and cost a fair amount to maintain. Whether you need them depends on your ports' loading conditions.
Other items to check: windlass and steering gear, whether a ballast water treatment system (BWTS) is fitted, and whether the fuel system meets low-sulfur rules. Under new regulations these directly affect operability.
