中文
15067647777Vessel Trading Inquiry
Home / Vessel Trading Guides / Tonnage Basics

DWT, GT, NT Explained: Understanding Vessel Tonnage

Differences and uses of DWT, GT and NT: freight is based on DWT, port dues on GT, canal tolls on NT, with conversion relationships and buying scenarios.

'How big is this vessel?' has three completely different answers in ship trading: DWT, GT and NT. They aren't interchangeable; mixing them up miscalculates costs. This article clarifies all three.

1. DWT (Deadweight Tonnage)

The total weight a vessel can carry at full draft, including cargo, fuel, fresh water, ballast, stores, crew and their supplies. Unit: tonnes (weight tons).

DWT approximates 'how much it can carry' but isn't cargo capacity. A 5000 DWT vessel, after deducting fuel, water and stores, can actually load about 4500 to 4800 tonnes, depending on voyage length and bunkering.

Freight negotiation, voyage revenue estimates and cargo acceptance all use DWT. The '5000 ton bulk carrier' in a sale quote refers to DWT.

2. GT (Gross Tonnage)

A dimensionless figure derived from the total volume of all enclosed spaces under the 1969 International Convention on Tonnage Measurement of Ships. It isn't weight but a 'volume conversion index'.

GT is used for administrative and economic measurement: vessel registration, port dues, pilotage and tug fees, canal tolls, manning requirements and thresholds for certain safety rules (e.g. above 500 GT).

For a 5000 DWT short-sea bulk carrier, GT is usually between 2900 and 3000. So when you see 'GT 2960 / NT 1652', don't mistake it for cargo capacity.

3. NT (Net Tonnage)

Derived from GT by deducting non-revenue spaces such as crew quarters, engine room and ballast tanks; it represents the effective volume available for cargo.

NT mainly affects the basis for port dues and canal tolls (Suez and Panama have their own tonnage rules). For buyers, a smaller NT means lower operating cost at the same carrying capacity—an optimization goal in ship design.

4. Other Dimensions to Consider Together

Full-load draft: determines which ports and berths you can enter. Many 'cheap but unusable' vessels fail because draft exceeds the target port or channel limit.

LOA / LBP, breadth and depth: affect berthing, docking, lock transit and hold capacity. Depth also relates to freeboard and load line.

Hold capacity (bulk / bagged volume): for light bulky cargo look at hold volume, for heavy cargo look at DWT. 'Enough volume, not enough DWT' and vice versa are two entirely different vessels.

FAQ

Can a 5000 DWT vessel carry 5000 tonnes of cargo?
No. DWT includes fuel, fresh water, stores and crew supplies; actual cargo must deduct these. Short coastal voyages can often load over 90% of DWT, while long voyages or heavy bunkering reduce it noticeably.
Which is larger, GT or DWT?
No fixed relationship. For heavy-cargo vessels like bulkers and tankers, DWT is usually far greater than GT; for volume-type vessels such as passenger and Ro-Ro ships, GT may approach or even exceed DWT. They measure different dimensions and can't be compared directly.
Which tonnage is port dues based on?
Most ports charge on GT or NT, varying by item: tonnage tax, pilotage and tugage often use GT, some dues use NT. Canal tolls follow the canal authority's own tonnage rules. Always clarify the basis when discussing transport costs.
Which tonnage matters most when buying?
Start with your use case. For carrying, look at DWT and hold volume; for costs, GT and NT; for port access, full-load draft. Consider all three against your target route and port conditions for a complete judgment.
Compiled by Taizhou Changlong Ship Trading Co., Ltd. based on real transaction experience. Specific vessel condition is subject to physical survey and current regulations.